Now the airspy for you that want to use it aswell.
Airspy R2Cost:
$258.08 AUDAirspy
Seamless tuning of SDR# with AIrspy & SpyverterTechnical specifications:Continuous 24 ? 1800 MHz native RX range, down to DC with the SpyVerter option
3.5 dB NF between 42 and 1002 MHz
Tracking RF filters
35dBm IIP3 RF front end
12bit ADC @ 20 MSPS (80dB Dynamic Range, 64dB SNR, 10.4 ENOB)
10MSPS IQ output
Experimental 2.5MSPS IQ output for low power devices (Raspberry Pi, Odroid, etc.)
Up to 80 MSPS when using custom firmware
Cortex M4F @ up to 204MHz with Multi Core support (dual M0)
0.5 ppm high precision, low phase noise clock
1 RTC clock (for packet time-stamping)
External clock input (10 MHz to 100 MHz via MCX connector) ? Ideal for phase coherent radios
10 MHz panoramic spectrum view with up to 9MHz alias/image free
IQ or Real, 16bit fixed or 32bit float output streams
No IQ imbalance, DC offset or 1/F noise at the center of the spectrum that plagues all the other SDRs
Extension ports: 16 x SGPIO
1 x RF Input (SMA connector, 15kV ESD protection)
1 x RF Output (Loopthrough, U-FL, 15kV ESD protection)
2 x High Speed ADC inputs (up to 80 MSPS, U-FL, DC coupled)
4.5v software switched Bias-Tee to power LNA?s and up/down-converters
8 x programmable high speed gpio?s up to 100MHzv
3 x programmable synchronized clock outputs up to 160MHz
1 x core CPU clock output
1 x reset pin
2 x regulated +5.0 and +3.3v pins
1 x JTAG header
No drivers required! 100% Plug-and-play on Windows Vista, Seven, 8, 8.1 and 10
Better USB noise immunity
Better ESD protection on VUSB
Better ESD protection on the RF input
Added ESD protection on the dual High Speed ADC inputs
Better RF Shielding
Better RF Filtering
Replaced the micro USB connector with a custom designed, more robust, 4 through hole points model
Better thermal stability
Better compatibility with the SpyVerter
Were to buyhttps://www.itead.cc/airspy.htmlAirspy web pagehttps://airspy.com/
