Icom IC2010 UHF Remote with box and programing cable & software $SOLD, you can contact me on 98912123
ICOM UHF CB
IC-F2010CB UHF CRS Mobile
(UHF) 40 Channel CB (5W) Mobile Transceiver.Commercial grade, based on: IC-F2010(F2) Commercial Mobile Transceiver. Ex1761 Channel Expansion & CB Programming
Details s Rugged construction
The highly dependable diecast aluminum chassis and polycarbonate front panel are resistant to impact.
Multiple signalling systems*
5-tone encoder/decoder compatible with a wide variety of European signalling requirements including CCIR, ZVEI1, ZVEI2, DZVEI, EEA, EEA2 and EIA.
* 5-tone encoder is standard; the optional UT-96 is necessary for 5-tone decode.
Detachable front panel*
A detachable front panel provides numerous mounting possibilities and is simple to install in almost any vehicle.
* RMK-1 and OPC-609 are required.
Programmable assign function
A limited number of switches (6) provides easy operation. Moreover, functions can be assigned to switches providing customization to suit specific needs.
Large, alphanumeric display
Advanced programming package for PC
--------------------------------------------------------------------------------
ADDITIONAL FEATURESData Compatible
Selectable channel spacing (channel independent)
32 Channels for 5-tone encoder (standard)
Emergency call with single or repeat function
8 Identities + group code for 5-tone decode (optional).
Selectable digits for 5-tone decoded indication
Automatic ID transmissions linked to PTT Standard CTCSS with 51 frequencies (plus 1 programmable)
Standard DTCS with selectable polarity
7 DTMF autodialing memories. Up to 8 characters for memory name indication
Bank seperation capability
5 scan channel groups and 2 priority channels
Automatic scan start and/or receive mute when mic is replaced in the hanger
Automatic priority channel selection and/or receive mute release when mic is picked up
Normal scan and priority scan
Adjustable transmit release period to prevent noise burst at end of transmission when using CTCSS.
Remote monitoring capability (optional UT-96 required)
Optional passcode input to prevent operation by unathourised persons
Programmable minimum level for audio
Selectable transmit power
Talk around function (temporary simplex operation on a duplex channel)
Transmit lockout (channel busy/repeater/reverse repeater)
2 selectable ?stun? functions (optional UT-96 required)
External I/O terminal socket (optional OPC-617 required)
Specifications GENERAL Frequency coverage (Unit; MHz) : IC-F1010 136-155 146-174
IC-F2010 400-430 450-490 490-520
Mode : 16K0F3E, 8K50F3E
No. of channels : 32 (standard), 160 (optional)
Channel spacing : 12.5 kHz and 25 kHz
PLL channel step : 5 kHz, 6.25 kHz and 7.5 kHz*
Power supply requirement : 13.2 V DC ?15% (neg. ground)
Current drain (at 13.2 V DC) : At 25 W
Squelched
Max. audio output I I 7 A (IC-F1010) 8 A (IC-F2010)
700 mA
1.2 A
Usable temp. range : -25?C to +55?C
Frequency stability : ?1500 Hz
Dimensions (proj. not incl.) : 150(W) ? 50(H) ? 180(D) mm
Weight : 1.5 kg
TRANSMITTER Output power : High 25 W
Low 2.5 W
Max. frequency deviation : ?2.5 kHz, ?5.0 kHz
Adjacent channel power : 60 dB (12.5 kHz)
70 dB (25 kHz)
Spurious emissions : 0.25 ?W (max.)
Hum and noise : 50 dB typ. (IC-F1010)
45 dB typ. (IC-F2010)
RECEIVER Sensitivity (20 dB SINAD) : 0.63 ?V emf (IC-F1010)
0.67 ?V emf (IC-F2010)
Squelch sensitivity (at threshold) : 0.22 ?V (IC-F1010)
0.25 ?V (IC-F2010)
Adj. channel selectivity : 70 dB typ. (12.5 kHz)
75 dB typ. (25 kHz)
Intermodulation rejection : 65 dB
Spurious responserejection
(typical) : 80 dB (IC-F1010)
70 dB (IC-F2010)
Hum and noise (typical) : 50 dB (IC-F1010)
45 dB (IC-F2010)
Audio output power : 4 W typ. at 10% distortion with a 4 load
