Hi all.
I have the Uniden UH-011 Alignment infomation here for anyone who needs
it, but what I am asking for is does anyone have the mod to make them
scan?
I have seen inside of one that has been modded and all it was, was a
wire from linked from a pin on a chip inside the radio to the T/SQL
button on the front.
You then only had to push that button in on the front to make it scan
at about 2 channels per second. Pushing the button again made it stop I
think.
Please if anyone has info on this mod I would really appreciate it, I
have not found it anywhere on the internet.
Here is the alignment info for anyone who needs it.
Alignment information for Uniden UH-011
Contact author:
Rod, VK4XTL
Print
UH011(Early Model)
PLL UC1368A
DRV = 2SC2131
PA = 2SC3021
Alignment
Frequency - L302
VR101 - AF Gain
VR102 - Squelch
VR251 - Deviation
VR301 - Modulation Balance
---------------------------------------------------------------------------?-----
UH011
(PD-658AA)
PLL UC1368A
PA = 2SC3021
DRV = 2SC2131
Alignment
Frequency - (Small Inductor can in PLL)
RT103 - AF Gain
RT102 - Squelch
RT201 - Deviation
?? - Modulation Bal
RT101-.S.Meter
RT203-.S.Meter
RT203-ALC
Thank you to anyone who can help
